Understand what the estimate needs to cover before entering quantities or costs. Clear inclusions, exclusions, and bid requirements help define the work.
02
Review plans and record the takeoff
Review the drawings, identify the electrical scope, and record the quantities needed for the estimate.
03
Build material and labor
Organize takeoff items with products and assemblies. Use labor units to develop labor alongside the material portion of the estimate.
04
Account for the full job
Material and labor are only part of the bid. Review job expenses, overhead, and profit before settling on the final number.
05
Turn the estimate into a proposal
After checking the recap, prepare a professional proposal that reflects the scope and reviewed estimate.
A customer wants four existing lights replaced in a stockroom with clear access. The boxes, circuits and controls can be reused. Try building the bid from the quantities below, then check your total. All figures are for this exercise.
Count the material. Four replacement fixtures at $75 each come to $300. Add $40 for connectors, mounting hardware and other consumables. Material totals $340.
Extend the labor. Allow 1.25 person-hours per fixture to remove the old light and install the replacement. Four fixtures take five person-hours. At a burdened labor rate of $60 per hour, labor totals $300.
Add the direct job expenses. Carry $60 for delivery and disposal. The direct job cost is $340 + $300 + $60 = $700.
Build the bid. This shop allocates $70 of overhead to the job, bringing its cost to $770. A 10% markup on that cost adds $77. The example bid is $847.
Write the scope the customer will see. “Remove four existing stockroom lights, furnish and install four replacements on the existing circuits and controls, and remove the old fixtures from the site.” If access changes or a circuit needs repair, revisit the labor and scope before quoting.
Download the Excel takeoff sheet to record quantities by drawing and area. A worked example shows how to handle material you price directly, supplier quotes, owner-furnished items, and unresolved scope.
Labor is one of the most important parts of an electrical estimate. Material pricing matters. Vendor quotes matter. Gear packages matter. But if the labor side of the estimate is rushed, inconsistent, or based only on memory, the final number can look clean on paper and still miss the real cost of the job. That […]
Learn how electrical estimating assemblies connect material and labor, reduce missed supporting items, document repeatable installation logic, and make estimates easier to review.
Compare two supplier quotes with the Excel worksheet. The worked example shows how carton size, freight, and a quote that expires before the order date affect the price you carry in the bid.
Accurate electrical estimating is not about producing the lowest number. It is about building a complete, reviewable cost for the work shown in the plans and specifications—then adding the overhead, risk, and profit the business needs. When an estimate is incomplete, a contractor may win the job and still lose money. When it is unnecessarily […]
From a reviewed takeoff to a customer proposal In Red Rhino Electrical Estimating Software, each takeoff section becomes a line in the proposal editor. If you estimate lighting and branch power separately, you can review those amounts individually before previewing the bid your customer will see. Open the full-size demo proposal preview to read the […]